Description
Details:
SUNIX UPD2018 is a Dual-port Super-Speed+ USB 3.1 10G PCI Express add-on card, and it’s compliant with the PCI Express Gen3 specification for host PC system. Based on USB Type-C pure DFP (Downstream Facing Port) mode, it works up to 10 Gbps for data transfer when connecting to USB 3.1 compliant peripherals, while maintaining compatibility with existing USB peripheral devices. USB 3.1 performance is 2 times faster than USB 3.0 and 20 times faster than USB 2.0 connectivity. In addition, one USB Type-C port supports DisplayPort Alternate-mode for video output, and the other is a USB data-only port
With USB Type-C Receptacle, SUNIX UPD2018 supports reversible plug orientation and cable direction, which means that users will no longer need to be concerned with plug orientation/cable direction, making it easier to plug in. The new connector is smaller and thinner design, but drive higher power output capacity to the USB device. SUNIX UPD2018 supports 5VDC@1500mA power output to USB device with overcurrent protection on each USB port. This card is an ideal choice for external storage, smartphone, webcam, video devices, and all other USB electronic devices.
Box Includes.
1 x Display port Male-Male cable 24CM
1 x UPD2018 PCI-E Card
1X Low-profile adapter
Specifications:
USB Communication
- Interface
- Universal Serial Bus 3.1 / 3.0 / 2.0 / 1.1
- Speed
- SuperSpeed+(10Gbps)
- SuperSpeed(5Gbps)
- High Speed (480Mbps)
- Full Speed (12Mbps)
- Low Speed (1.5Mbps)
- No. of Port
- 2-port
- PCB Connector
- USB 3.1
- USB Type-C port (Downstream Facing Port)
- Protection
- ±15KV IEC61000-4-2 Air Gap Discharge
- ± 8KV IEC61000-4-2 Contact Discharge
Video / Audio
- Input Interface
- DisplayPort Female Ver1.2/1.1
- Output Interface USB Type-C port
- Resolution
- Maximum resolution supports 4096×2160 (3840×2160) @ 60Hz
- Audio
- Yes (audio pass-through)
Power
- Source
- PCI Express Bus Power
- Output Capacity Type-C Port Power Delivery +5VDC / 1.5A / each port.
- Over Current Protection +5VDC / 1.5A / each port / Power Switch
- Power Consumption
- 3.0W @ 3.3V (board only without power output to USB device)
Driver Support
- Windows Windows 7 (X86/X64)
- Windows 8.x / 10 (X86/X64) (Windows in-box driver)
Environment
- Operation Temperature 0 to 60°C (32 to 140°F)
- Operation Humidity 5 to 95% RH
- Storage Temperature -20 to 70°C (-4 to 158°F)